2nd flight of scanner

Maiden flight- Scanner(new entry to nitro plane)

P51

P-51 Mustang EP (Miss America)


Features:

Scaled park flyer fabricated with top quality balsa / plywood and covered with genuine heat shrink covering. Strong wood
structure and tough covering give the airframe the best load to weight ratio and capability for further power upgrades
Full house controls ( ailerons, elevators, rudder, and throttle ) extend maneuvering limits and deliver scale flying
Fully symmetrical airfoil enhance aerobatics performance
Comes with geared speed 400 motor and propeller
Strong and light pre-painted fiber glass cowling
All necessary hardware and accessories provided, including the Ultralite pilot which greatly enhance scaled look without weight penalty



P-51 Mustang EP (Yellow)
P-51 Mustang EP (Silver)
Length(mm): 34.5 in / 880 mm
Wing Span(mm): 39.5 in / 1000 mm
Weight(g): 26 oz / 740 g
Min channel: 4ch 4 servos

Spitfire

Spitfire EP


Features:
Scaled park flyer fabricated with top quality balsa/plywood
Strong wood structure and tough covering give the airframe the best load to weight ratio and capability for further power upgrades
Fully symmetrical airfoil enhance aerobatics performance
The Ultralite pilot will greatly enhance scale look without weight penalty
All necessary hardware and accessories provided

Length(mm): 32.6 in / 830 mm
Wing Span(mm): 39.5 in / 1000 mm
Weight(g): 26 oz / 740 g
Min channel: 4ch 4 servos

Zero fighter

Zero Fighter EP


Features:
Full house controls (ailerons, elevators, rudder and throttle)
Scales warbird park flyer
All wood construction and covered with pre-painted genuine heat shrink LighTex covering
Pre-installed retractable landing gear
Pre-painted fiberglass cowling
Ultralite pilot included
Length(mm): 32.6 in / 830 mm
Wing Span(mm): 39.5 in / 1000 mm
Weight(g): 26 oz / 740 g
Min channel: 4ch 4 servos

F4U Consair

Features:
Scaled park flyer warbird
All wood construction and covered with pre-painted genuine heat shrink LighTex covering
Detachable Battery Cover
Full house controls
Pre-painted fiberglass cowling
Ultralite pilot included

Length(mm): 32.6 in / 830 mm
Wing Span(mm): 39.5 in / 1000 mm
Weight(g): 26 oz / 740 g
Min channel: 4ch 4 servos

tamecat

Jeff Troy's Tamecat EP


Features:
Aerobatic park flyer fabricated with top quality balsa and plywood
Covered with genuine heat shrink World Models' LighTex coverings
Strong wood structure and tough covering give the airframe the best load to weight ratio
Comes with 10x6 Folding Propeller PL6314020
Ultralite pilot statue included

Length(mm): 32.6 in / 830 mm
Wing Span(mm): 39.5 in / 1000 mm
Weight(g): 26 oz / 740 g
Min channel: 4ch 4 servos

A10

Hello,

We would like to introduce the all new A-10 twin 64mm edf. It is a 3S set up and recommended battery 2200 mah 3s at least 20c.

Without a doubt, this is one of the most accurate scale A-10 in the market, even the retract works like the full scale.

This plane has been proven and flown successfully. It flies well and has a very low wing loading resulting in low take off and landing speed. Being a straight wing, this plane flies normally and does not exhibit any unfavourable characteristic.

Almost all the bits are preinstalled making assembly time minimal.
The wings are spared with carbon rod making it strong and rigid.
Having twin 64mm edf, power is in excess making this aircraft one of the faster 64mm edf around.

The A-10 comes in 2 colours. Dessert camo and Green Camo.

Specs:
Wing span: 1060mm
Length: 988mm
Approx flying weight: 850-900g
Wing loading approx: 51g/dm2
Power plant: twin 64mm edf with twin 30 amps ESC
Retracts: Electric retracts (servos preinstalled)
Battery recommended: 2200mah 3s min20C (not included)

F15 EDF jet fighter

hi all,

We are pleased to announce the arrival of the new Freewing F15 model. Kit will come with servos, EDF motor and fan, ESC, landing gear. All ready to fly with your receiver plug in. We are proud to introduce, yet another, first in the world launch of the freewing F-15 Eagle. Following is the preliminary specification and introduction to the kit. This is without a doubt the most Scale foam edf F-15 in the market. It is a ARF, the motor/fan and servos are preinstalled, Just glue together the main pieces, installed the receiver and connect the battery. She is then ready to ROCK. It comes with water transfer decals for the 65th Aggressor Squadron . The fuse is airbrushed with the same famous blue gray livery. Workmanship on this kit is second to none. The foam is dense and smooth. The paint job is sharp and tidy. Panel lines are accurate. Also molded with substantial flightdeck detail. In all, this kit is a beauty and definitely stands out as one of the best in its class.


Specification:
Wingspan 740mm Length 1100mm
Take of weight approx 680-720g
Wngloading approx 14.5-18 oz/sqft
Motor Brushless 14L inrunner
Esc 30 amps
Fan 64mm
Recommended battery 1800-2200 3S, 16-25C lipo(Not included)

F14 Tomcat

Dear All,

We are indeed priviledged to introduce the most famous fighter ever, the F-14 TOMCAT. Over the years, many models have been produced to replicate this beautiful Jet, somehow something always fall short, either non-functional variable sweep wings or non scale cheater holes or non retracts. For the first time ever, a true to scale edf TOMCAT is now available. It comes as a kit with all the accessories for the variable sweep wings provided and fixed gears. We are offering this Jet as a kit as it is meant for intermediate to advance pilots. The construction is fairly challenging and air retracts is available as an option. These air retracts are custom designed specifically for this F-14 therefore all the hardware to fit the reatracts are available and no extensive modification is required. Full instruction is provided for the installation of the pneumatic retracts into this F-14.

The 60mm fans are provided with all kits. It comes with 5 and 3 bladed impellers. We recommend a 4S set up for this plane with BEC however the combination is only limited by the builder. This plane has been flown successfully on 3S and 4S.

For all the static model enthusiast who also flies RC, this kit resembles a static kit more than it does RC. On opening the box, the amount of components is overwhelming, from the working variable sweepwings mechanisms to the extra Phoenix/Sparrow missiles and fairings. All of which have been reproduced accurately. The plane comes painted in the high vis 2 tone Grey of the 1980s, no painting is necessary. The current planes are of VF-84 Jolly Rogers, the famous Skull and cross bones. Full set of water transfer decals are provided, this includes stencils and detail markings. The decals sheet is more detail than some of the decal sheets available for static planes.

Assembly of the plane is fairly challenging but requiring only basic tools and glue. The variable sweep wing is operated by a single servos. The optional retracts are operated pneumatically up and spring loaded down. These retracts are about the smallest CNC metal pneumatic retracts in the market. All hardware for the retracts is provided with the retracts option.

With that, I would like to introduce the EVER BEAUTIFUL F-14 TOMCAT.
-TOMCAT FOREVER!

Specs:

Length: 1060mm
Wingspan: 1100mm(extended)
AUW: about 1300g
Radio: 4-8 ch
Servos: 4-8 servos
Gears: Fix(comes standard) or optional pneumatic retracts
Fan: 60mm (twin)
Motor*: 4800-5000 KV for 3S (not included)
3700-4100 kv for 4S (not included)
ESC*: 35-45 amps (3s or 4s) (not included)
Battery*: 2200 3s 35C (not included)
2200 4S 35C (not included)

F16 EDF jet fighter

Dear All,

We would like to introduce the brand new F-16 CJ 80mm.
In the Spirit of National Day, we are again making custom RSAF for this beautiful JET.
This F-16 is powered by a 4S brushless motor spinning a 8 bladed 80mm fan. This spectacular combination will provide plenty of power for excellent performance.
We recommend 4s 1700 to 2200 mah lipo 35C.(not included)
Follow the pictures below, one would realise the scale landing gears, eventhough it is not retractable but the gears are the most scale replica of f-16 undercarriage in the market presently. With these details, this kit is an excellent candidate for static display as well as RC.
It is of foam (EPS) construction and just like all the planes we carry, it is of close grain high dense foam which makes the finishing true to scale.
Minimal consturction is needed and the plane comes painted. Water slide decals are included and for the RSAF version the additional water transfer decal sheet are included.

This plane is some what specially packed to keep the cost down.
We are carrying it as a 1.5 kit. The kit content includes:

1) Airframe with all hardware and landing gears
2) Decals
3) Motor and
4) 80mm 8 bladed fan

*Servos and ESC in not included.

Specs:

Scale: 1:13.5
Length: 1107mm
Wingspan: 720mm
AUW: 950-1100g
Motor: brushless motor
Fan: 80mm 8 bladed
Servos: 5 x 9g servos (not included)
Esc: 45 to 50 amps (not included)
Regulator: 3-5amp regulator(not included)

fly cam-mahkota cheras(my home)

fly cam at kuala kangsar perak- sg perak & istana

The only fly cam at kuala kangsar perak airport( near sg perak & istana ). Fantastic airport & view. Thanks for watching.

belt cp heli